description the accutek family of pga adapter modules are designed to permit the soldering of surface mount plcc, qfp, tqfp, pqfp devices into a standard pga through-hole pc board. these pga adapter modules are a pin compatible drop in replacement for end-of-life pga devices. standard pin counts include 28, 32, 44, 52, 68, 84 and 100 pins. can accommodate square and rectangular plccs with 0.050? lead pitch and sizes from 0.600? to 1.500?. they also ac - commodate quad flat packs with 0,5mm and 0,65mm lead pitch. they feature 0.018? diameter machined pins with integral standoffs. plating options are tin, solder or gold pins. accutek pga adapters were developed for users with motherboard designs that require pga?s, now obsoleted by manufacturers. these adapter modules are designed for soldering directly into a through-hole pc board and save costly motherboard redesigns. accutek pga adapter modules are fully assembled and tested. they can be manufactured turnkey or from customer supplied sur - face mount chips. custom multi-chip and double sided configurations are also avail - able for special functions. features saves costly redesign of current motherboards fully tested with life time limited warranty standard pin counts include 28, 32, 44, 52, 68, 84 and 100 tin, solder or gold plated pins available 0.018? diameter machined pga pins with integral standoffs, custom sizes available ic assembly and testing available eprom and flash programming available custom multi-chip and double-sided modules available pga adapter modules accutek microcircuit corporation accutek microcircuit corporation 5 new pasture road newburyport, ma 01950-4040 phone: 978-465-6200 fax: 978-462-3396 email: sales@accutekmicro.com internet: www.accutekmicro.com accutek reserves the right to make changes in specifications at any time and without notice. accutek does not assume any responsibility for the use of any circuitry described; no circuit patent licenses are im - plied. preliminary data sheets cont ain minimum and maximum limits based upon design objectives, which are subject to change upon full characterization over the specific operating conditions.
accutekmicro.com 8/2001(pg01) 100 pin plcc to pin grid array 84 pin plcc to pin grid array 68 pin plcc to pin grid array 52 pin plcc to pin grid array 44 pin plcc to pin grid array 32 pin plcc to pin grid array 28 pin plcc to pin grid array 0.100" 0.100" 0.100" 0.100" 0.100" 0.100" 0.100" ak84plcc-pga rev 0 accutek 1.300" 1.300" pin #1 0.062" 0.205" ak84plcc-pga top view bottom view ak100plcc-pga rev 0 accutek 1.500" 1.500" pin #1 0.062" 0.205" ak100plcc-pga top view bottom view ak68plcc-pga rev 0 accutek 1.100" 1.100" pin #1 0.062" 0.205" ak68plcc-pga top view bottom view ak52plcc-pga rev 0 accutek 0.900" 0.900" pin #1 0.062" 0.205" ak52plcc-pga top view bottom view ak44plcc-pga rev 0 accutek 0.800" 0.800" pin #1 0.062" 0.205" ak44plcc-pga top view bottom view ak32plcc-pga rev 0 accutek 0.600" 0.700" 0.062" 0.205" ak32plcc-pga top view bottom view pin #1 ak28plcc-pga rev 0 accutek 0.600" 0.600" 0.062" 0.205" ak28plcc-pga top view bottom view pin #1
accutekmicro.com 6/2004(pg01a) 0.100" 0.100" 0.100" 0.100" 0.100" 32 pin plcc socket to pin grid array 0.100" 28 pin plcc socket to pin grid array 44 pin plcc socket to pin grid array 52 pin plcc socket to pin grid array 68 pin plcc socket to pin grid array 84 pin plcc socket to pin grid array 1.365" 1.365" pin #1 0.062" 0.205" top view bottom view 1.165" 1.165" pin #1 0.062" 0.205" top view bottom view 0.965" 0.965" pin #1 0.062" 0.205" top view bottom view 0.865" 0.865" pin #1 0.062" 0.205" top view bottom view 0.062" 0.205" top view bottom view pin #1 0.062" 0.205" ak32pcs-pga (with plcc socket included) top view bottom view pin #1 0.275" 0.665" 0.765" 0.665" 0.665" 0.275" ak28pcs-pga (with plcc socket included) 0.275" ak44pcs-pga (with plcc socket included) AK52PCS-PGA (with plcc socket included) ak68pcs-pga (with plcc socket included) ak84pcs-pga (with plcc socket included) 0.275" 0.275" 0.275" a plcc socket can be added to most of our plcc to pga adapters
page 2 accutekmicro.com 6/2004 (pg02) 100 pin .5mm qfp to pin grid array 100 pin .65mm pqfp to pin grid array 100 pin .65mm 14x20 pqfp to pin grid array 0.100" 0.100" 144 pin .5mm qfp to pin grid array 0.100" 0.100" 208 pin .5mm qfp to pin grid array 0.100" 1.500" 1.500" 0.062" 0.205" ak100pga-100qfp top view bottom view pin #1 0.552" 0.660" 0,5mm 1.500" 1.500" 0.062" 0.205" ak100pga-100pqfp top view bottom view pin #1 0,65mm 0.784" 0.902" 1.500" 1.500" 0.062" 0.205" ak100pga-14x20-100pqfp top view bottom view pin #1 0.578" 0.698" 0.814" 0.934" 0,65mm 1.500" 1.500" 0.062" 0.205" ak144pga-144qfp.5mm top view bottom view pin #1 0.769" 0.877" 0,5mm ak144pga-144qfp 20 x 20 - .5mm 2.000" 2.000" 0.062" 0.205" ak208pga-208qfp.5mm top view bottom view pin #1 1.083" 1.191" 0,5mm ak208pga-208qfp .5mm
48 pin pqfp to 52 pin grid array 0.320" 0.180" 0.300" 1.600" ak32d-qfp5x5 0.400" 0.01968" (.5mm) 0.125" 0.110" 0.100" 32 pin qfp 5 x 5mm to dip page 3 accutekmicro.com 5/2004 (pg03) 0.100" 80 pin qfp to 84 pin grid array 52 pin pqfp to pin grid array 0.100" 0.100" 84 pin qfp to 84 pin grid array 0.100" 32 pin plcc socket to pin grid array 0.100" 0.900" 0.900" 0.062" 0.205" ak52pga-48pqfp top view bottom view pin #1 0,5mm 0.384" 0.276" 1.300" 1.300" 0.062" 0.205" ak84pga-80qfp top view bottom view 0.900" 0.900" 0.062" 0.205" ak52pga-52pqfp top view bottom view 0.579" 0.695" 0,65mm pin #1 pin #1 0.422" 0.538" 0,65mm 1.300" 1.300" 0.062" 0.205" ak84pga-84qfp top view bottom view 0,65mm 0.682" 0.800" pin #1 0.600" 0.700" 0.062" 0.205" ak32pcs-pga (with plcc socket included) top view bottom view pin #1 0.275"
1.553" 1.553" 0.050" bottom view top view 160 pin pga board (for attachment of 160 pin pqfp microprocessor chips) 0.270" 0.395" side view (with 160 pin qfp installed) 2.400" 0.600" 0.715" 0.475" special application adapters brass pin solder coated 0.125" ak48tsop-dip 48 pin dip adapter for flash chips page 4 accutekmicro.com 2/2003 (pg04) 0.100" 0,5mm" 0.825" 1.110" 1.260" 0,65mm 0.077" 0.098"
|
